The WS Type Amphibious Water Pump is a water-cooled pump for aquaculture water supply, pond drainage, agricultural irrigation and general water transfer. Four WS models cover 1.5–3.7 kW, with 80 mm or 100 mm outlets and rated flow points of 30–60 m³/h.
A SUS304 stainless steel outer shell, bronze impeller and dual mechanical seals support water-handling applications. The series can be configured for underwater pumping or an appropriate land-based water-transfer arrangement, with the required water supply and cooling maintained.
Key Features of the WS Amphibious Water Pump
- Water-cooled motor: water passes along the motor side to remove heat during operation.
- Dual mechanical seals: SiC/SiC sealing faces, an oil seal and an epoxy-sealed cable entry help protect the dry-type motor.
- Stainless steel outer construction: SUS304 outer shell and motor casing, combined with HT200 cast-iron covers.
- Bronze centrifugal-channel impeller: designed for water transfer with resistance to wear and corrosion.
- IP68 motor protection and Class F insulation: specified for the series.
- Internally coated cast components: a protective paint treatment helps resist rust.
- Connection options: outlet sizes of 80 mm and 100 mm allow matching to different pipe arrangements.
Applications
The WS series is intended for applications where the required duty point falls within the selected model’s performance range:
- Fish pond water supply and drainage.
- Aquaculture water transfer and water exchange.
- Agricultural irrigation and farm water supply.
- Construction-site drainage, subject to confirmation of the water and solids conditions.
- Landscape water transfer and garden irrigation.
For other water-transfer configurations, compare our large-flow submersible drainage pump and floating irrigation and drainage pump.
WS Pump Model Specifications
| Model | Power (kW) | Outlet (mm) | Phase | Poles | Rated flow (m³/h) | Rated head (m) | Max. body diameter (mm) | Height (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| WS-0203 | 1.5 | 80 | 3 | 2 | 30 | 8 | 245 | 530 | 43 |
| WS-0303 | 2.2 | 80 | 3 | 2 | 36 | 10 | 245 | 530 | 46 |
| WS-0304 | 2.2 | 100 | 3 | 2 | 48 | 10 | 245 | 530 | 46 |
| WS-0504 | 3.7 | 100 | 3 | 2 | 60 | 12 | 270 | 680 | 54 |
Selection note: flow and head above are rated duty points, not maximum flow or shut-off head. Actual performance depends on the selected configuration, supply frequency and pipe system. Confirm the required voltage and frequency when ordering.
Head–Flow Performance Curves
Use the head–flow curves to match the required flow rate to the system’s total head. Include the elevation difference and pipe losses when describing the application. For example, WS-0304 is listed at a rated point of 48 m³/h and 10 m head; it should not be selected using flow alone.
Motor, Materials and Operating Conditions
| Item | Specification |
|---|---|
| Outlet diameter | 80 mm / 100 mm |
| Liquid temperature | 1–40°C |
| Listed liquid applications | Agricultural irrigation, farm water supply and drainage |
| Frequency options | 50 Hz / 60 Hz; confirm the ordered version |
| Motor | Dry-type underwater motor; 2-pole, 3-phase models listed |
| Insulation class | F |
| Protection class | IP68 |
| Bearing | Deep-groove ball bearing |
| Seal | Dual mechanical seal; SiC/SiC sealing faces |
| Impeller design / material | Centrifugal channel / bronze |
| Outer shell and motor casing | SUS304 stainless steel |
| Covers | HT200 cast iron |
| Cable | H07RN-F |
| Special specifications | Available subject to confirmation of project requirements |
Underwater and Land-Based Pumping Arrangements
For underwater use, the pump draws water through its intake strainer. For the land-based arrangement described for this series, the intake strainer is removed and the intake is connected to the water source using the appropriate pipe fittings. Confirm the connection arrangement with our team before installation.
Amphibious does not mean dry-running. The water-cooled motor requires the specified water flow for cooling. Confirm the priming, cooling and operating requirements for the chosen arrangement; do not start the pump without the required water supply.
Have the electrical supply, earthing and protection checked by a qualified electrician, and match the supply to the actual motor nameplate. Isolate power before inspecting the intake or changing pipe connections.
Select a WS Model for Your Project
Send our team the following details so we can confirm a suitable model and connection arrangement:
- Required flow rate in m³/h and total head in metres.
- Pipe diameter, length, elevation difference and main fittings.
- Water source, temperature, salinity and any sand or suspended solids.
- Underwater or land-based installation and intended operating schedule.
- Available voltage, phase and frequency.
- Quantity and any special specification requirements.
The standard sheet does not state a maximum solids passage or allowable submergence depth. Provide these site conditions for confirmation when they are relevant to your application.
Request a quotation for the WS Type Amphibious Water Pump using the enquiry form on this page. You can also explore our aquaculture equipment range for pond water management.
Product Data Sheets
View the WS model specification sheet, standard motor and materials sheet or complete product overview sheet for the supplied technical information.

